Fluke 750P24 Pressure Module 4352324 Calibrator Differential 0 to 15 psi 750P

Description

Fluke 750P24 Pressure Module 4352324 Calibrator Differential 0 to 15 psi 750P
LAST ONE!!!!
IN STOCK, Ships immediately!!!
This is the CHEAPEST price ANYWHERE on a genuine part.
This is new, never used or installed.
Get the best price ANYWHERE HERE!!!
Get your genuine high end part for much cheaper here.  Don't worry about old used parts breaking, this is brand new.  Don't settle for used parts this is brand new.  BETTER BUILT!!!
This part sells for over 55
Fluke 750P Series of Pressure Modules
Ideal pressure modules to enable gage, differential and absolute pressure measurements.
The 750P series features 48 pressure modules and covers pressure calibrations from 0 to 1 in H
2
O to 10,000 psi (2.5 mBar to 690 bar).
Gage pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting.Each module is clearly labeled for range, over pressure and media compatibility.
Quick and Easy Measurement
The 750P Series is easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. When used with the 750 Series Documenting Process Calibrators (
Fluke 753
or
Performance and Technology
The 750P Series pressure modules are highly accurate with specifications that apply form 0°C to 50°C, a feature that sets them apart form other pressure calibrators. Many ranges have total uncertainties of 0.04% of full scale and reference uncertainties of 0.01% of full scale.
Each module has its own microprocessor, allowing it to run the measurement circuitry and to communicate digitally with a calibrator. When connected to the calibrator the modules coefficients are uploaded from the pressure module to the calibrator. Then, as pressure measurements are made, raw sensor values for pressure and temperature are digitally loaded to the calibrator, where the raw sensor values and coefficients are manipulated to derive and display the pressure reading. This innovative technique yields several benefits:
Digital communication eliminates errors due to poor connections and electrical interference.
The modules are inherently temperature-compensated from 0 °C to 50 °C (32 °F to 122 °F).
The modules are fully interchangeable because all measurements are completed in the pressure module itself and then communicated to the calibrator in digitized form. Modules are calibrated independently of the calibrator, and can be used with any 740, 750 or compatible 720 or 710 series calibrator. Each module has its own serial number to maintain independent traceability.
Sensor Protection in Isolated Modules
Many of these modules incorporate a stainless steel diaphragm to isolate the sensor. With these modules, any medium that is compatible with stainless steel can be used on the high side of the module.
Rugged Construction
A urethane overmolding protects against shock if a module is accidentally dropped and also seals against dirt, dust and moisture.
Convenient Setup
A cable between the pressure module and calibrator reduces the length of connecting tubing to the pressure source. The remote pressure head also provides an extra margin of safety and convenience by removing the calibrator and operator from the pressure source in the event or need for semi remote measurements.